sourCEntral - mobile manpages

pdf

SG_LUNS

NAME

sg_luns − send the SCSI REPORT LUNS command

SYNOPSIS

sg_luns [−−decode] [−−help] [−−hex] [−−maxlen=LEN] [−−quiet] [−−raw] [−−select=SR] [−−verbose] [−−version] DEVICE

DESCRIPTION

Send the SCSI REPORT LUNS command to the DEVICE and outputs the response. In the SPC−3 SCSI standard support for this command is mandatory.

OPTIONS

Arguments to long options are mandatory for short options as well.
−d
, −−decode

decode logical unit numbers into their hierarchical parts. Interprets luns as described in SAM−3 when the HiSup bit is set in a standard INQUIRY’s response.

−h, −−help

output the usage message then exit.

−H, −−hex

output response to this command in ASCII hex.

−m, −−maxlen=LEN

where LEN is the (maximum) response length in bytes. It is placed in the cdb’s "allocation length" field. If not given (or LEN is zero) then 8192 is used. The maximum allowed value of LEN is 65536.

−q, −−quiet

output ASCII hex rendering of each report lun, one per line.

−r, −−raw

output response in binary (to stdout).

−s, −−select=SR

this option sets the ’select report’ field (SR) in the SCSI REPORT LUNS command. The default value is 0. When 0 is given (or this option is not specified) then the DEVICE should yield a list of luns addressable via this "I_T nexus" that use the following lun addressing methods: logical unit addressing, peripheral device addressing and flat space addressing. When 1 is given the DEVICE should yield a list of only "well known" logical units addressable via this "I_T" nexus. When 2 is given the DEVICE should yield all luns addressable via this "I_T" nexus. To simplify, for the I_T nexus associated with the DEVICE, the meanings of the SR values are:
0
: all luns excluding well known logical units
1
: well known logical units
2
: all luns
Values between 0xf8 and 0xff (inclusive) are vendor specific (SPC−4 (rev 32), other values greater than 2 are reserved.

−v, −−verbose

increase the level of verbosity, (i.e. debug output).

−V, −−version

print the version string and then exit.

EXIT STATUS

The exit status of sg_luns is 0 when it is successful. Otherwise see the sg3_utils(8) man page.

AUTHORS

Written by Douglas Gilbert.

REPORTING BUGS

Report bugs to <dgilbert at interlog dot com>.

COPYRIGHT

Copyright © 2004−2011 Douglas Gilbert
This software is distributed under a FreeBSD license. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.

SEE ALSO

sg_inq(8)

pdf