INDISERVER

NAME

indiserver − INDI server for telescope control under KStars

SYNOPSIS

indiserver [ −p port ] [ −r attempts ] [ −vv ] driver [ driver ... ]

DESCRIPTION

KStars allows you to configure and control astronomical instruments such as telescopes and focusers via the INDI protocol. indiserver is a server that sits between the KStars user interface and the low-level hardware drivers.

The INDI server is a network server, in that either local or remote clients may connect to it to control astronomical instruments. The INDI server must be running on the machine that is physically connected to the astronomical instruments.

Note that there is no need for you to run the INDI server directly. Using the KStars device manager, you can set up astronomical instruments and start or stop the INDI server all from within KStars.

You may however choose to run the INDI server manually from the command line. In this case you must pass the names of one or more drivers for individual astronomical instruments. The current list of available drivers is:

celestrongps (Celestron GPS)
fliccd (Finger Lakes Instruments CCD)
lx200_16 (LX200 16")
lx200autostar (LX200 Autostar)
lx200classic (LX200 Classic)
lx200generic (LX200 Generic)
lx200gps (LX200 GPS)
temma (Temma Takahashi)
v4ldriver (Video4Linux Generic)
v4lphilips (Philips Webcam)

Much more detailed information can be found in the KStars Handbook, as described below.

KStars is a graphical desktop planetarium for KDE, and forms part of the official KDE edutainment module.

OPTIONS

−p port

Specify the port to listen on (defaults to 7624).

−r attempts

Specify the maximum number of restart attempts for each driver (defaults to 2).

EXAMPLE

To start an INDI server running an LX200 GPS driver and listening to connections on port 8000:

prompt$ indiserver -p 8000 lx200gps

SEE ALSO

celestrongps(1), fliccd(1), lx200_16(1), lx200autostar(1), lx200classic(1), lx200generic(1), lx200gps(1), kstars(1), temma(1), v4ldriver(1), v4lphilips(1).

The KStars Handbook contains detailed information on how to use INDI for telescope control. You can read this handbook in the KDE Help Centre. Alternatively you can enter the URL help:/kstars/indi.html directly into konqueror or you can run ‘khelpcenter help:/kstars/indi.html’ from the command-line.

If the KDE Help Centre is not installed then you can install the package kdeedu-doc-html and read this documentation in HTML format from /usr/share/doc/kde/HTML/en/kstars/indi.html.

AUTHOR

KStars was written by Jason Harris <jharris AT 30doradus DOT org>, Heiko Evermann <heiko AT evermann DOT de>, Thomas Kabelmann <tk78 AT gmx DOT de>, Pablo de Vicente <pvicentea AT wanadoo DOT es>, Jasem Mutlaq <mutlaqja AT ikarustech DOT com>, Carsten Niehaus <cniehaus AT gmx DOT de>, Mark Hollomon <mhh AT mindspring DOT com>, Vincent Jagot <vincent DOT jagot AT free DOT fr> and Martin Piskernig <martin DOT piskernig AT stuwo DOT at>.
This manual page was prepared by Ben Burton <bab AT debian DOT org> for the Debian GNU/Linux system (but may be used by others).