sfxtest − test utility for the Linux AWE32 driver
sfxtest [command parameters] ...
This manual page documents briefly the sfxtest command. This manual page was written for the Debian GNU/Linux distribution (but may be used by others), because the original program does not have a manual page.
sfxtest is a program designed for testing that the Linux AWE32 driver has been set up properly, and that the appropriate patch files are loaded correctly (using sfxload(1), or gusload(1)).
The program takes a series of commands followed by arguments. It accepts the following commands:-
X |
Instructs the program to use channel control mode. |
x channel
Changes the channel being operated on to channel
b bank |
Changes the bank being used to bank |
p program
Changes the program (instrument) being used to program
n note velocity
Sends a noteon command for note note at velocity velocity
k |
Kills a note (sends noteoff). |
|||
K note |
Kills the note note (used for channel mode). |
r value
Sets the pitch sense to value
w value
Sets the putch wheel to value
t |
time Waits for time hundredths of a second. |
c value
Sets the panning value to value
v note velocity
Changes the key pressure of note to velocity velocity
D mode |
Sets the debug mode of the driver to mode |
|||
C mode |
Sets the chorus type to mode |
|||
R mode |
Sets the reverb type to mode |
F parameter value
Sends an effect command type parameter , with value value
I |
(Re-)Initializes the AWE32 driver and EMU8000 chip. |
sfxload(1), gusload(1), drvmidi(1)
This manual page was written by Tom Lees <tom AT lpsg DOT demon DOT co DOT uk>, for the Debian GNU/Linux system.
The AWE32 driver and utilties were written by Takashi Iwai <iwai AT dragon DOT mm DOT t DOT u-tokyo DOT ac DOT jp>.