SPICCTRL

NAME

SPICCTRL − Sony Vaio SPIC control program

SYNOPSIS

spicctrl [-a|-b NUM|-B|-c|-C|-l NUM|-L|-p|-r|-R|-s|-S]

DESCRIPTION

spicctrl is utility that can use the Sony Programmable I/O Control device (SPIC), which is part of Sony Vaio’s, to do a few simple things.

Currently, it can only be used to control the brightness on the LCD backlight or print out the battery charge information. The amount of brightness of the LCD is given as a number ranging from 0 (most dim) to 255 (most bright).

OPTIONS

−a, --getacstatus

Get AC adaptor status (plugged in or not).

−b, --setbrightness=NUM

Set lcd screen brightness.

−B, --getbrightness

Get lcd screen brightness.

−c, --getbat1capacity

Get the first battery full capacity.

−C, --getbat2capacity

Get the second battery full capacity.

−l, --setbluetoothpower=NUM

Set the bluetooth device power state (0=off, 1=on).

−L, --getbluetoothpower

Get the bluetooth device power state (0=off, 1=on).

−p, --powerstatus

Prints out a battery summary line.

−r, --getbat1remaining

Get the first battery remaining capacity.

−R, --getbat2remaining

Get the second battery remaining capacity.

−s, --getbat1status

Get the first battery status (present or not).

−S, --getbat2status

Get the second battery status (present or not).

−f, --setfanstatus=NUM

Set fan speed (0=off, other values progressively increase the speed of the fan - note that there are only about 6 speed levels that map to the 8 bits)

−F, --getfanstatus

Get fan speed (0 should be OFF) −T, --gettempstatus Get temperature (Degree C) - useful under APM when there is no way to get the temperature otherwise

FILES

/dev/sonypi

sonypi interface device file. You must be able to write to the file to use this program.

AUTHOR

spicctrl was written by Stelian Pop <stelian AT popies DOT net>, and this man page was written by Joey Hess <joey AT kitenet DOT net>.