sourCEntral - mobile manpages

pdf

WMND

NAME

WMND − WindowMaker network device monitor

SYNOPSIS

wmnd { options }

DESCRIPTION

WMND is a WindowMaker dock application that shows a graph of the network traffic of the past few minutes, current activity and current and overall send and receive rates. Additionally it can launch any program in response to mouse clicks.

OPTIONS

−i interface

Select the interface to start with.

−I interface

Interface/s to monitor. Defaults to all but lo and irda. Under linux (using the linux_proc driver) you can specify multiple interfaces separated by commas to force offline ones and combine them into a single instance.

−D driver

Specify a driver to use. Defaults to auto-probe.

−l

Start using long device names.

−m

Start with maximal values hidden.

−t

Start without displaying connection time of ppp links.

−M

Use the maximal values of the entire history.

−w mode

Select display mode to start with. Use wmnd −h for a list of available display modes. Right clicks on the graph cycle through all available modes.

−r rate

refresh rate in microseconds

−s scroll

scroll rate in tenths of seconds

−S steps

Number of scroll steps to wait before updating the speed rate indicator.

−b

Scale the values of the maximum and current rate by factors of base 2 instead of the default 10-based scaling. (1K equals 1024 in binary mode, but 1000 in decimal mode.)

−c color

tx color

−C color

rx color

−L color

middle line color

−d display

Draw onto X11 display display

−f config

Read config instead of ~/.wmndrc

−F

Don’t parse ~/.wmndrc

−h

Show summary of options.

−v

Show version of WMND.

−q

Be less verbose (display only errors).

−Q

Show informational messages.

−o float

Smoothing factor (a float from 0 to 1).

−a bytes

Use a fixed scale for the bytes modes specified in bytes per second. By default uses an automatic scale.

−n name

Change the WMND class/title name (defaults to "wmnd").

USAGE

Active Interface
You can cycle in realtime through all available active interfaces by simply left-clicking on the interface name gadget on the upperleft corner of WMND or use the mouse wheel.

The ’lo’ interface is an exception, ’lo’ only works when invoked from the commandline (wmnd −I lo), lo was mainly built in for testing purposes.

Device Name
By default, WMND show device name in short term of four characters, for example, the ippp0 will be displayed as ipp0. You can toggle the device name between short and long by right-click on it.

Graphic Mode
Left-click on the main graphic area to cycle the graphic mode.

Max Meter
Left-click to toggle the history max or screen max, default is screen max when WMND is startup. Right-click to hide or display.

Byte/Packet Mode
Left-click on the letter gadgeted on the right-top corner can switch between the Byte or Packet counter mode. "B" for byte, "p" for packet.

User Script
Click on the bottom rate meter can invoke the user command defined in resource file .wmndrc.

Dragging WMND
Be sure to drag WMND on it’s outer edges, it’s a bit picky due to the large gfx pixmap it keeps. You can also use a keyboard and mouse shortcut (perhaps ALT+left-click) in your window manager to drag it around.

Drivers
solaris_fpppd

Solaris/Linux ppp streams driver. Gathers device data from /dev/ppp. Uses code from the Solaris/Linux pppd server and it should work wherever Solaris/Linux pppd works.

linux_proc

Reads data from the linux proc(5) virtual filesystem.

freebsd_sysctl

Uses the MIB to gather device statistics under FreeBSD (offline devices handling is buggy, support needed!)

netbsd_ioctl

Read statistics through the NetBSD ioctl call.

solaris_kstat

Gather all devices of class net from the kstat library.

irix_pcp

Reads metrics from the IRIX Performance Co-Pilot daemon. Interface format:

[host@]interface

generic_snmp

Query an IF-MIB capable snmp server for gathering interface statistics. By default generic_snmp connects to localhost and uses the public community. You can change the community/host/interface to monitor by using the −I flag:

[community@]host[:interface]

You must specify an interface number, not an interface name. If the interface number is 0, or there’s no interface specification, WMND will display all available interfaces. By default the community name is "public". Beware that by specifying an snmp v1 community name on a command line can be dangerous on an multiuser platform. Please read the README file on the distribution for more details.

testing_dummy

This is the "last resort" driver, it shows a null device useful only to make WMND don’t exit when all other drivers failed. Can be enchanced to display something at compile time.

FILES

~/.wmndrc User configuration.

The format of this file is described in the example file "wmndrc" coming with the distribution (see /usr/share/doc/wmnd/).

SIGNALS

SIGTERM SIGINT

Clean WMND shutdown.

BUGS

Report bugs and suggestion to the current WMND maintainer: wave++ <wavexx AT users DOT sf DOT net>. More informations (including usage instructions) can be found into the README file found into the distribution. These informations should be integrated here too.

SEE ALSO

X(3x), wmaker(1x). proc(5)

AUTHOR

This manual page was written by Arthur Korn <arthur AT korn DOT ch>. The original WMND authour is Reed Lai <reed AT wingeer DOT org>.

pdf