3C515-DIAG

NAME

3c515-diag − setup and diagnostic program for the 3Com 3c515 Ethernet cards.

SYNOPSIS

3c515-diag [options]

DESCRIPTION

3c515-diag is a program that you can use to diagnose problems with 3Com 3c515 ethercards as well as reconfiguring it.

OPTIONS

These programs follow the usual GNU command line syntax, with long options starting with two dashes (‘-’). A summary of options is included below.
−h, −−help

Show summary of options.

−V, −−version

Show version of program.

−v, −−verbose

Verbose mode.

−q, −−quiet

Be very unverbose.

−a, −−all

Print all registers.

−p, −−base-address <port>

Specify port to use. Valid values are: 0x240, 0x280, 0x300, 0x320, 0x340, 0x360

−f, −−interface <interface>

Interface number. Valid Options are: 10baseT, 10base2, and 10Mbs AUI.

−Q, −i, −−irq <irq>

Specify new interrupt. Valid values are: 3-5,7,9-15.

−w, −−write-EEPROM <values>

Write to the EEPROMS with the specified values.

SEE ALSO

mii-diag(8)

AUTHOR

This manual page was written by Alain Schroeder <alain AT debian DOT org>, for the Debian GNU/Linux system (but may be used by others).