sourCEntral - mobile manpages

pdf

OutgoingDataQueue

NAME

OutgoingDataQueue − A generic outgoing RTP data queue supporting multiple destinations.

SYNOPSIS

#include <oqueue.h>

Inherits OutgoingDataQueueBase, and DestinationListHandler.

Inherited by RTPDataQueue.

Public Member Functions

bool addDestination (const InetHostAddress &ia, tpport_t dataPort=DefaultRTPDataPort, tpport_t controlPort=0)
bool addDestination (const InetMcastAddress &ia, tpport_t dataPort=DefaultRTPDataPort, tpport_t controlPort=0)
bool forgetDestination (const InetHostAddress &ia, tpport_t dataPort=DefaultRTPDataPort, tpport_t controlPort=0)
bool forgetDestination (const InetMcastAddress &ia, tpport_t dataPort=DefaultRTPDataPort, tpport_t controlPort=0)
void addContributor (uint32 csrc)
Add csrc as the CSRC identifier of a new contributor.

bool removeContributor (uint32 csrc)
Remove CSRC from the list of contributors.

bool isSending () const
Determine if outgoing packets are waiting to send.

void putData (uint32 stamp, const unsigned char *data=NULL, size_t len=0)
This is used to create a data packet in the send queue.

void sendImmediate (uint32 stamp, const unsigned char *data=NULL, size_t len=0)
This is used to create a data packet and send it immediately.

void setPadding (uint8 paddinglen)
Set padding.

void setMark (bool mark)
Set marker bit for the packet in which the next data provided will be send.

bool getMark () const
Get wheter the mark bit will be set in the next packet.

size_t setPartial (uint32 timestamp, unsigned char *data, size_t offset, size_t max)
Set partial data for an already queued packet.

microtimeout_t getDefaultSchedulingTimeout
() const
void setSchedulingTimeout (microtimeout_t to)
Set the default scheduling timeout to use when no data packets are waiting to be sent.

microtimeout_t getDefaultExpireTimeout
() const
void setExpireTimeout (microtimeout_t to)
Set the ’expired’ timer for expiring packets pending in the send queue which have gone unsent and are already ’too late’ to be sent now.

microtimeout_t getExpireTimeout
() const
uint32 getSendPacketCount () const
Get the total number of packets sent so far.

uint32 getSendOctetCount () const
Get the total number of octets (payload only) sent so far.

uint16 getSequenceNumber () const
Get the sequence number of the next outgoing packet.

void setOutQueueCryptoContext (CryptoContext *cc)
Set ouput queue
CryptoContext.
void removeOutQueueCryptoContext (CryptoContext *cc)
Remove output queue
CryptoContext.
CryptoContext
* getOutQueueCryptoContext (uint32 ssrc)
Get an output queue
CryptoContext identified by SSRC.

Protected Member Functions

OutgoingDataQueue ()
virtual ~OutgoingDataQueue ()
void dispatchImmediate (OutgoingRTPPkt *packet)
This is used to write the RTP data packet to one or more destinations.

microtimeout_t getSchedulingTimeout
()
This computes the timeout period for scheduling transmission of the next packet at the ’head’ of the send buffer.

size_t dispatchDataPacket ()
This function is used by the service thread to process the next outgoing packet pending in the sending queue.

void setNextSeqNum (uint32 seqNum)
For thoses cases in which the application requires a method to set the sequence number for the outgoing stream (such as for implementing the RTSP PLAY command).

uint32 getCurrentSeqNum (void)
void setInitialTimestamp (uint32 ts)
uint32 getInitialTimestamp ()
void purgeOutgoingQueue ()
virtual void setControlPeer (const InetAddress &host, tpport_t port)

Protected Attributes

Mutex cryptoMutex
std::list< CryptoContext * > cryptoContexts

Classes

struct OutgoingRTPPktLink

Detailed Description

A generic outgoing RTP data queue supporting multiple destinations.

Author:

Federico Montesino Pouzols <fedemp AT altern DOT org>

Constructor & Destructor Documentation

OutgoingDataQueue::OutgoingDataQueue () [protected]
virtual OutgoingDataQueue::~OutgoingDataQueue ()
[inline, protected, virtual]

Member Function Documentation

bool OutgoingDataQueue::addDestination (const InetHostAddress & ia, tpport_t dataPort = DefaultRTPDataPort, tpport_t controlPort = 0)
bool OutgoingDataQueue::addDestination (const InetMcastAddress & ia, tpport_t dataPort = DefaultRTPDataPort, tpport_t controlPort =
0)
bool OutgoingDataQueue::forgetDestination (const InetHostAddress & ia, tpport_t dataPort = DefaultRTPDataPort, tpport_t controlPort =
0)
bool OutgoingDataQueue::forgetDestination (const InetMcastAddress & ia, tpport_t dataPort = DefaultRTPDataPort, tpport_t controlPort =
0)
void OutgoingDataQueue::addContributor (uint32 csrc)

Add csrc as the CSRC identifier of a new contributor.

This method adds the CSRC identifier to a list of contributors that will be inserted in every packet enqueued from now on.

bool OutgoingDataQueue::removeContributor (uint32 csrc)
Remove CSRC from the list of contributors.

bool OutgoingDataQueue::isSending () const
Determine if outgoing packets are waiting to send.

Returns:

true if there are packets waiting to be send.

void OutgoingDataQueue::putData (uint32 stamp, const unsigned char * data = NULL, size_t len = 0)
This is used to create a data packet in the send queue.

Sometimes a ’NULL’ or empty packet will be used instead, and these are known as ’silent’ packets. ’Silent’ packets are used simply to ’push’ the scheduler along more accurately by giving the appearence that a next packet is waiting to be sent and to provide a valid timestamp for that packet.

Parameters:

stamp Timestamp for expected send time of packet.
data
Value or NULL if special ’silent’ packet.
len
May be 0 to indicate a default by payload type.

void OutgoingDataQueue::sendImmediate (uint32 stamp, const unsigned char * data = NULL, size_t len = 0)
This is used to create a data packet and send it immediately.

Sometimes a ’NULL’ or empty packet will be used instead, and these are known as ’silent’ packets. ’Silent’ packets are used simply to ’push’ the scheduler along more accurately by giving the appearence that a next packet is waiting to be sent and to provide a valid timestamp for that packet.

Parameters:

stamp Timestamp immediate send time of packet.
data
Value or NULL if special ’silent’ packet.
len
May be 0 to indicate a default by payload type.

void OutgoingDataQueue::setPadding (uint8 paddinglen) [inline]
Set padding.

All outgoing packets will be transparently padded to a multiple of paddinglen.

Parameters:

paddinglen pad packets to a length multiple of paddinglen.

void OutgoingDataQueue::setMark (bool mark) [inline]
Set marker bit for the packet in which the next data provided will be send.

When transmitting audio, should be set for the first packet of a talk spurt. When transmitting video, should be set for the last packet for a video frame.

Parameters:

mark Marker bit value for next packet.

bool OutgoingDataQueue::getMark () const [inline]
Get wheter the mark bit will be set in the next packet.

size_t OutgoingDataQueue::setPartial (uint32 timestamp, unsigned char * data, size_t offset, size_t max)
Set partial data for an already queued packet.

This is often used for multichannel data.

Parameters:

timestamp Timestamp of packet.
data
Buffer to copy from.
offset
Offset to copy from.
max
Maximum data size.

Returns:

Number of packet data bytes set.

microtimeout_t OutgoingDataQueue::getDefaultSchedulingTimeout () const [inline]
void OutgoingDataQueue::setSchedulingTimeout (microtimeout_t to)
[inline]
Set the default scheduling timeout to use when no data packets are waiting to be sent.

Parameters:

to timeout in milliseconds.

microtimeout_t OutgoingDataQueue::getDefaultExpireTimeout () const [inline]
void OutgoingDataQueue::setExpireTimeout (microtimeout_t to)
[inline]
Set the ’expired’ timer for expiring packets pending in the send queue which have gone unsent and are already ’too late’ to be sent now.

Parameters:

to timeout to expire unsent packets in milliseconds.

microtimeout_t OutgoingDataQueue::getExpireTimeout () const [inline]
uint32 OutgoingDataQueue::getSendPacketCount () const
[inline]
Get the total number of packets sent so far.

Returns:

total number of packets sent

uint32 OutgoingDataQueue::getSendOctetCount () const [inline]
Get the total number of octets (payload only) sent so far.

Returns:

total number of payload octets sent in RTP packets.

uint16 OutgoingDataQueue::getSequenceNumber () const [inline]
Get the sequence number of the next outgoing packet.

Returns:

the 16 bit sequence number.

void OutgoingDataQueue::setOutQueueCryptoContext (CryptoContext * cc)
Set ouput queue CryptoContext.

The endQueue method (provided by RTPQueue) deletes all registered CryptoContexts.

Parameters:

cc Pointer to initialized CryptoContext.

void OutgoingDataQueue::removeOutQueueCryptoContext (CryptoContext * cc)
Remove output queue CryptoContext.

The endQueue method (provided by RTPQueue) also deletes all registered CryptoContexts.

Parameters:

cc Pointer to initialized CryptoContext to remove.

CryptoContext* OutgoingDataQueue::getOutQueueCryptoContext (uint32 ssrc)
Get an output queue CryptoContext identified by SSRC.

Parameters:

ssrc Request CryptoContext for this incoming SSRC

Returns:

Pointer to CryptoContext of the SSRC of NULL if no context available for this SSRC.

void OutgoingDataQueue::dispatchImmediate (OutgoingRTPPkt * packet) [protected]
This is used to write the RTP data packet to one or more destinations.

It is used by both sendImmediate and by dispatchDataPacket.

Parameters:

RTP packet to send.

microtimeout_t OutgoingDataQueue::getSchedulingTimeout () [protected]
This computes the timeout period for scheduling transmission of the next packet at the ’head’ of the send buffer.

If no packets are waiting, a default timeout is used. This actually forms the ’isPending()’ timeout of the rtp receiver in the service thread.

Returns:

timeout until next packet is scheduled to send.

size_t OutgoingDataQueue::dispatchDataPacket () [protected]
This function is used by the service thread to process the next outgoing packet pending in the sending queue.

Returns:

number of bytes sent. 0 if silent, <0 if error.

void OutgoingDataQueue::setNextSeqNum (uint32 seqNum) [inline, protected]
For thoses cases in which the application requires a method to set the sequence number for the outgoing stream (such as for implementing the RTSP PLAY command).

Parameters:

seqNum next sequence number to be used for outgoing packets.

uint32 OutgoingDataQueue::getCurrentSeqNum (void) [inline, protected]
void OutgoingDataQueue::setInitialTimestamp (uint32 ts)
[inline, protected]
uint32 OutgoingDataQueue::getInitialTimestamp ()
[inline, protected]
void OutgoingDataQueue::purgeOutgoingQueue ()
[protected]
virtual void OutgoingDataQueue::setControlPeer (const InetAddress & host, tpport_t port)
[inline, protected, virtual]
Reimplemented in RTPDuplex.

Member Data Documentation

Mutex OutgoingDataQueue::cryptoMutex [mutable, protected]
std::list<CryptoContext *> OutgoingDataQueue::cryptoContexts
[protected]
uint32 OutgoingDataQueue::packetCount
uint32 OutgoingDataQueue::octetCount
uint16 OutgoingDataQueue::sendSeq
uint32 OutgoingDataQueue::sendSources[16]
uint16 OutgoingDataQueue::sendCC
uint8 OutgoingDataQueue::paddinglen
bool OutgoingDataQueue::marked
bool OutgoingDataQueue::complete
timeval OutgoingDataQueue::overflowTime

Author

Generated automatically by Doxygen for ccRTP from the source code.

pdf