sourCEntral - mobile manpages

pdf

KAS

NAME

kas - kas Documentation

INTRODUCTION

This tool provides an easy mechanism to setup bitbake based projects.

The OpenEmbedded tooling support starts at step 2 with bitbake. The downloading of sources and then configuration has to be done by hand. Usually, this is explained in a README. Instead kas is using a project configuration file and does the download and configuration phase.

Key features provided by the build tool:

clone and checkout bitbake layers

create default bitbake settings (machine, arch, ...)

launch minimal build environment, reducing risk of host contamination

initiate bitbake build process

USER GUIDE

Dependencies & installation
This project depends on

Python 3

distro Python 3 package

jsonschema Python 3 package

PyYAML Python 3 package (optional, for yaml file support)

kconfiglib Python 3 package (optional, for menu plugin)

NEWT Python 3 distro package (optional, for menu plugin)

To install kas into your python site-package repository, run:

$ sudo pip3 install .

Usage
There are (at least) four options for using kas:

Install it locally via pip to get the kas command.

Use the container image locally. In this case, download the kas-container script from the kas repository and use it in place of the kas command. The script version corresponds to the kas tool and the kas image version.

Use the container image in CI. Specify ghcr.io/siemens/kas/kas[-isar][:<x.y>] in your CI script that requests a container image as runtime environment. See https://github.com/orgs/siemens/packages/container/kas%2Fkas/versions and https://github.com/orgs/siemens/packages/container/kas%2Fkas-isar/versions for all available images.

Use the run-kas wrapper from this directory. In this case, replace kas in the examples below with path/to/run-kas.

Start build:

$ kas build /path/to/kas-project.yml

Alternatively, experienced bitbake users can invoke usual bitbake steps manually, e.g.:

$ kas shell /path/to/kas-project.yml -c 'bitbake dosfsutils-native'

kas will place downloads and build artifacts under the current directory when being invoked. You can specify a different location via the environment variable KAS_WORK_DIR.

Use Cases

1.

Initial build/setup:

$ mkdir $PROJECT_DIR
$ cd $PROJECT_DIR
$ git clone $PROJECT_URL meta-project
$ kas build meta-project/kas-project.yml

2.

Update/rebuild:

$ cd $PROJECT_DIR/meta-project
$ git pull
$ kas build kas-project.yml

3.

Interactive configuration:

$ cd $PROJECT_DIR/meta-project
$ kas menu
$ kas build  # optional, if not triggered via kas menu

Plugins
kas sub-commands are implemented by a series of plugins. Each plugin typically provides a single command.

build plugin
This plugin implements the kas build command.

When this command is executed, kas will checkout repositories, setup the build environment and then invoke bitbake to build the targets selected in the chosen config file.

For example, to build the configuration described in the file kas-project.yml you could run:

kas build kas-project.yml

checkout plugin
This plugin implements the kas checkout command.

When this command is executed, kas will checkout repositories and set up the build directory as specified in the chosen config file. This command is useful if you need to inspect the configuration or modify any of the checked out layers before starting a build.

For example, to setup the configuration described in the file kas-project.yml you could run:

kas checkout kas-project.yml

for-all-repos plugin
This plugin implements the kas for-all-repos command.

When this command is executed, kas will checkout the repositories listed in the chosen config file and then execute a specified command in each repository. It can be used to query the repository status, automate actions such as archiving the layers used in a build or to execute any other required commands.

For example, to print the commit hashes used by each repository used in the file kas-project.yml (assuming they are all git repositories) you could run:

kas for-all-repos kas-project.yml 'git rev-parse HEAD'

The environment for executing the command in each repository is extended to include the following variables:

KAS_REPO_NAME: The name of the current repository determined by either the name property or by the key used for this repo in the config file.

KAS_REPO_PATH: The path of the local directory where this repository is checked out, relative to the directory where kas is executed.

KAS_REPO_URL: The URL from which this repository was cloned, or an empty string if no remote URL was given in the config file.

KAS_REPO_REFSPEC: The refspec which was checked out for this repository, or an empty string if no refspec was given in the config file.

menu plugin
This plugin implements the kas menu command.

When this command is executed, kas will open a configuration menu as described by a Kconfig file. It processes any pre-existing configuration file with saved settings, stores the final selections and invokes the build plugin if requested by the user.

To make use of this plugin, a Kconfig file has to be provided. The menu can define these types of configuration variables that the plugin will translate into a kas configuration:

kas configuration files that will be included when building the generated configuration. Those are picked up from kconfig string variables that have the name prefix KAS_INCLUDE_.

bitbake targets that shall be built via the generated configuration. Those are picked up from kconfig string variables that have the name prefix KAS_TARGET_.

The build_system that will used. The static kconfig string variable KAS_BUILD_SYSTEM defines this value which must be openembedded, oe or isar is set.

bitbake configuration variables that will be added to the local_conf_header section of the generated configuration. All other active kconfig string, integer or hex variables are treated as such.

See https://www.kernel.org/doc/html/latest/kbuild/kconfig-language.html for a complete documentation of the Kconfig language.

The menu plugin writes the selected configuration to a .config.yaml file in the kas work directory and also reads previous selection from such a file if it exists. The .config.yaml both contains the selected configuration in the menu_configuration key and also the effective settings that can be used to invoke kas build or other kas commands.

shell plugin
This plugin implements the kas shell command.

When this command is executed, kas will checkout repositories, setup the build environment and then start a shell in the build environment. This can be used to manually run bitbake with custom command line options or to execute other commands such as runqemu.

For example, to start a shell in the build environment for the file kas-project.yml you could run:

kas shell kas-project.yml

Or to invoke qemu to test an image which has been built:

kas shell kas-project.yml -c 'runqemu'

Project Configuration
Currently, JSON and YAML are supported as the base file formats. Since YAML is arguably easier to read, this documentation focuses on the YAML format.

# Every file needs to contain a header, that provides kas with information
# about the context of this file.
header:
  # The `version` entry in the header describes for which configuration
  # format version this file was created for. It is used by kas to figure
  # out if it is compatible with this file. The version is an integer that
  # is increased on every format change.
  version: x
# The machine as it is written into the `local.conf` of bitbake.
machine: qemux86-64
# The distro name as it is written into the `local.conf` of bitbake.
distro: poky
repos:
  # This entry includes the repository where the config file is located
  # to the bblayers.conf:
  meta-custom:
  # Here we include a list of layers from the poky repository to the
  # bblayers.conf:
  poky:
    url: "https://git.yoctoproject.org/git/poky"
    refspec: 89e6c98d92887913cadf06b2adb97f26cde4849b
    layers:
      meta:
      meta-poky:
      meta-yocto-bsp:

A minimal input file consists out of the header, machine, distro, and repos.

Additionally, you can add bblayers_conf_header and local_conf_header which are strings that are added to the head of the respective files (bblayers.conf or local.conf):

bblayers_conf_header:
  meta-custom: |
    POKY_BBLAYERS_CONF_VERSION = "2"
    BBPATH = "${TOPDIR}"
    BBFILES ?= ""
local_conf_header:
  meta-custom: |
    PATCHRESOLVE = "noop"
    CONF_VERSION = "1"
    IMAGE_FSTYPES = "tar"

meta-custom in these examples should be a unique name for this configuration entries.

We recommend that this unique name is the same as the name of the containing repository/layer to ease cross-project referencing.

In given examples we assume that your configuration file is part of a meta-custom repository/layer. This way it is possible to overwrite or append entries in files that include this configuration by naming an entry the same (overwriting) or using an unused name (appending).

Including in-tree configuration files
It's currently possible to include kas configuration files from the same repository/layer like this:

header:
  version: x
  includes:
    - base.yml
    - bsp.yml
    - product.yml

The paths to the files in the include list are either absolute, if they start with a /, or relative.

If the path is relative and the configuration file is inside a repository, then path is relative to the repositories base directory. If the configuration file is not in a repository, then the path is relative to the parent directory of the file.

Including configuration files from other repos
It's also possible to include configuration files from other repos like this:

header:
  version: x
  includes:
    - repo: poky
      file: kas-poky.yml
    - repo: meta-bsp-collection
      file: hw1/kas-hw-bsp1.yml
    - repo: meta-custom
      file: products/product.yml
repos:
  meta-custom:
  meta-bsp-collection:
    url: "https://www.example.com/git/meta-bsp-collection"
    refspec: 3f786850e387550fdab836ed7e6dc881de23001b
    layers:
      # Additional to the layers that are added from this repository
      # in the hw1/kas-hw-bsp1.yml, we add here an additional bsp
      # meta layer:
      meta-custom-bsp:
  poky:
    url: "https://git.yoctoproject.org/git/poky"
    refspec: 89e6c98d92887913cadf06b2adb97f26cde4849b
    layers:
      # If `kas-poky.yml` adds the `meta-yocto-bsp` layer and we
      # do not want it in our bblayers for this project, we can
      # overwrite it by setting:
      meta-yocto-bsp: excluded

The files are addressed relative to the git repository path.

The include mechanism collects and merges the content from top to bottom and depth first. That means that settings in one include file are overwritten by settings in a latter include file and entries from the last include file can be overwritten by the current file. While merging all the dictionaries are merged recursively while preserving the order in which the entries are added to the dictionary. This means that local_conf_header entries are added to the local.conf file in the same order in which they are defined in the different include files. Note that the order of the configuration file entries is not preserved within one include file, because the parser creates normal unordered dictionaries.

Including configuration files via the command line
When specifying the kas configuration file on the command line, additional configurations can be included ad-hoc:

$ kas build kas-base.yml:debug-image.yml:board.yml

This is equivalent to static inclusion from some kas-combined.yml like this:

header:
  version: x
  includes:
    - kas-base.yml
    - debug.image.yml
    - board.yml

Command line inclusion allows to create configurations on-demand, without the need to write a kas configuration file for each possible combination.

Note that all configuration files combined via the command line either have to come from the same repository or have to live outside of any versioning control. kas will refuse any other combination in order to avoid complications and configuration flaws that can easily emerge from them.

Configuration reference

header: dict [required]

The header of every kas configuration file. It contains information about the context of the file.
version: integer [required]

Lets kas check if it is compatible with this file. See the configuration format changelog for the format history and the latest available version.

includes: list [optional]

A list of configuration files this current file is based on. They are merged in order they are stated. So a latter one could overwrite settings from previous files. The current file can overwrite settings from every included file. An item in this list can have one of two types:
item: string

The path to a kas configuration file, relative to the repository root of the current file.

item: dict

If files from other repositories should be included, choose this representation.
repo: string [required]

The id of the repository where the file is located. The repo needs to be defined in the repos dictionary as <repo-id>.

file: string [required]

The path to the file, relative to the root of the specified repository.

build_system: string [optional]

Defines the bitbake-based build system. Known build systems are openembedded (or oe) and isar. If set, this restricts the search of kas for the init script in the configured repositories to oe-init-build-env or isar-init-build-env, respectively. If kas-container finds this property in the top-level kas configuration file (includes are not evaluated), it will automatically select the required container image and invocation mode.

defaults: dict [optional]

This key can be used to set default values for various properties. This may help you to avoid repeating the same property assignment in multiple places if, for example, you wish to use the same refspec for all repositories.
repos: dict [optional]

This key can contain default values for some repository properties. If a default value is set for a repository property it may still be overridden by setting the same property to a different value in a given repository.
refspec: string [optional]

Sets the default refspec property applied to all repositories that do not override this.

patches: dict [optional]

This key can contain default values for some repository patch properties. If a default value is set for a patch property it may still be overridden by setting the same property to a different value in a given patch.
repo: string [optional]

Sets the default repo property applied to all repository patches that do not override this.

machine: string [optional]

Contains the value of the MACHINE variable that is written into the local.conf. Can be overwritten by the KAS_MACHINE environment variable and defaults to qemux86-64.

distro: string [optional]

Contains the value of the DISTRO variable that is written into the local.conf. Can be overwritten by the KAS_DISTRO environment variable and defaults to poky.

target: string [optional] or list [optional]

Contains the target or a list of targets to build by bitbake. Can be overwritten by the KAS_TARGET environment variable and defaults to core-image-minimal. Space is used as a delimiter if multiple targets should be specified via the environment variable.

env: dict [optional]

Contains environment variable names with the default values. These variables are made available to bitbake via BB_ENV_EXTRAWHITE and can be overwritten by the variables of the environment in which kas is started.

task: string [optional]

Contains the task to build by bitbake. Can be overwritten by the KAS_TASK environment variable and defaults to build.

repos: dict [optional]

Contains the definitions of all available repos and layers.
<repo-id>: dict [optional]

Contains the definition of a repository and the layers, that should be part of the build. If the value is None, the repository, where the current configuration file is located is defined as <repo-id> and added as a layer to the build. It is recommended that the <repo-id> is related to the containing repository/layer to ease cross-project referencing.
name: string [optional]

Defines under which name the repository is stored. If its missing the <repo-id> will be used.

url: string [optional]

The url of the repository. If this is missing, no version control operations are performed.

type: string [optional]

The type of version control repository. The default value is git and hg is also supported.

refspec: string [optional]

The refspec that should be used. If url was specified but no refspec the revision you get depends on the defaults of the version control system used.

path: string [optional]

The path where the repository is stored. If the url and path is missing, the repository where the current configuration file is located is defined. If the url is missing and the path defined, this entry references the directory the path points to. If the url as well as the path is defined, the path is used to overwrite the checkout directory, that defaults to kas_work_dir + repo.name. In case of a relative path name kas_work_dir is prepended.

layers: dict [optional]

Contains the layers from this repository that should be added to the bblayers.conf. If this is missing or None or and empty dictionary, the path to the repo itself is added as a layer. Additionally, . is a valid value if the repo itself should be added as a layer. This allows combinations:

repos:
  meta-foo:
    url: https://github.com/bar/meta-foo.git
    path: layers/meta-foo
    refspec: master
    layers:
      .:
      contrib:

This adds both layers/meta-foo and layers/meta-foo/contrib from the meta-foo repository to bblayers.conf.
<layer-path>: enum [optional]

Adds the layer with <layer-path> that is relative to the repository root directory, to the bblayers.conf if the value of this entry is not in this list: ['disabled', 'excluded', 'n', 'no', '0', 'false']. This way it is possible to overwrite the inclusion of a layer in latter loaded configuration files.

patches: dict [optional]

Contains the patches that should be applied to this repo before it is used.
<patches-id>: dict [optional]

One entry in patches with its specific and unique id. All available patch entries are applied in the order of their sorted <patches-id>.
repo: string [required]

The identifier of the repo where the path of this entry is relative to.

path: string [required]

The path to one patch file or a quilt formatted patchset directory.

bblayers_conf_header: dict [optional]

This contains strings that should be added to the bblayers.conf before any layers are included.
<bblayers-conf-id>: string [optional]

A string that is added to the bblayers.conf. The entry id (<bblayers-conf-id>) should be unique if lines should be added and can be the same from another included file, if this entry should be overwritten. The lines are added to bblayers.conf in the same order as they are included from the different configuration files.

local_conf_header: dict [optional]

This contains strings that should be added to the local.conf.
<local-conf-id>: string [optional]

A string that is added to the local.conf. It operates in the same way as the bblayers_conf_header entry.

menu_configuration:: dict [optional]

This contains user choices for a Kconfig menu of a project. Each variable corresponds to a Kconfig configuration variable and can be of the types string, boolean or integer. The content of this key is typically maintained by the kas menu plugin in a .config.yaml file.

COMMAND LINE USAGE

kas - setup tool for bitbake based project

usage: kas [-h] [--version] [-d] {build,checkout,for-all-repos,shell,menu} ...

Positional Arguments

cmd

Possible choices: build, checkout, for-all-repos, shell, menu

sub command help

Named Arguments
--version

show program's version number and exit

-d, --debug

Enable debug logging

Default: False

Sub-commands:
build

Checks out all necessary repositories and builds using bitbake as specified in the configuration file.

kas build [-h] [--skip SKIP] [--force-checkout] [--update] [--target TARGET]
          [-c TASK]
          [config] [extra_bitbake_args ...]

Positional Arguments

config

Config file, using .config.yaml in KAS_WORK_DIR if none is specified

extra_bitbake_args

Extra arguments to pass to bitbake (typically requires separation via '--')

Named Arguments

--skip

Skip build steps

Default: []

--force-checkout

Always checkout the desired refspec of each repository, discarding any local changes

Default: False

--update

Pull new upstream changes to the desired refspec even if it is already checked out locally

Default: False

--target

Select target to build

-c, --cmd, --task

Select which task should be executed

checkout
Checks out all necessary repositories and sets up the build directory as specified in the configuration file.

kas checkout [-h] [--skip SKIP] [--force-checkout] [--update] [config]

Positional Arguments

config

Config file, using .config.yaml in KAS_WORK_DIR if none is specified

Named Arguments

--skip

Skip build steps

Default: []

--force-checkout

Always checkout the desired refspec of each repository, discarding any local changes

Default: False

--update

Pull new upstream changes to the desired refspec even if it is already checked out locally

Default: False

for-all-repos
Runs a specified command in all checked out repositories.

kas for-all-repos [-h] [--skip SKIP] [--force-checkout] [--update] [-E]
                  [config] command

Positional Arguments

config

Config file, using .config.yaml in KAS_WORK_DIR if none is specified

command

Command to be executed as a string.

Named Arguments

--skip

Skip build steps

Default: []

--force-checkout

Always checkout the desired refspec of each repository, discarding any local changes

Default: False

--update

Pull new upstream changes to the desired refspec even if it is already checked out locally

Default: False

-E, --preserve-env

Keep current user enviornment block

Default: False

shell
Run a shell in the build environment.

kas shell [-h] [--skip SKIP] [--force-checkout] [--update] [-E] [-k]
          [-c COMMAND]
          [config]

Positional Arguments

config

Config file, using .config.yaml in KAS_WORK_DIR if none is specified

Named Arguments

--skip

Skip build steps

Default: []

--force-checkout

Always checkout the desired refspec of each repository, discarding any local changes

Default: False

--update

Pull new upstream changes to the desired refspec even if it is already checked out locally

Default: False

-E, --preserve-env

Keep current user enviornment block

Default: False

-k, --keep-config-unchanged

Skip steps that change the configuration

Default: False

-c, --command

Run command

Default: ""

menu
Provides a configuration menu and triggers the build of the choices.

kas menu [-h] [kconfig]

Positional Arguments
kconfig

Kconfig file

Default: "Kconfig"

Environment variables

img

DEVELOPER GUIDE

Deploy for development
This project uses pip to manage the package. If you want to work on the project yourself you can create the necessary links via:

$ pip3 install --user -e .

That will install a backlink ~/.local/bin/kas to this project. Now you are able to call it from anywhere.

Docker image build
Just run:

$ docker build -t <image_name> .

When you need a proxy to access the internet, add:

--build-arg http_proxy=<http_proxy> --build-arg https_proxy=<https_proxy> --build-arg ftp_proxy=<ftp_proxy> --build-arg no_proxy=<no_proxy>

to the call.

Community Resources
Project home:

https://github.com/siemens/kas

Source code:

https://github.com/siemens/kas.git

git AT github DOT com:siemens/kas.git

Documentation:

https://kas.readthedocs.org

Mailing list:

kas-devel AT googlegroups DOT com

Subscription:

kas-devel+subscribe AT googlegroups DOT com

https://groups.google.com/forum/#!forum/kas-devel/join

Archives

https://groups.google.com/forum/#!forum/kas-devel

https://www.mail-archive.com/kas-devel AT googlegroups DOT com/

Class reference documentation
kas.kas Module

This module is the main entry point for kas, setup tool for bitbake based projects
kas.kas.create_logger()

Setup the logging environment

kas.kas.interruption()

Ignore SIGINT/SIGTERM in kas, let them be handled by our sub-processes

kas.kas.kas(argv)

The actual main entry point of kas.

kas.kas.kas_get_argparser()

Creates an argparser for kas with all plugins.

kas.kas.main()

The main function that operates as a wrapper around kas.

kas.libkas Module
This module contains the core implementation of kas.
class kas.libkas.LogOutput(live)

Handles the log output of executed applications
log_stderr(line)

This method is called when a line is received over stderr.

log_stdout(line)

This method is called when a line is received over stdout.

kas.libkas.find_program(paths, name)

Find a file within the paths array and returns its path.

kas.libkas.get_build_environ(build_system)

Creates the build environment variables.

kas.libkas.repos_apply_patches(repos)

Applies the patches to the repositories.

kas.libkas.repos_fetch(repos)

Fetches the list of repositories to the kas_work_dir.

kas.libkas.run_cmd(cmd, cwd, env=None, fail=True, liveupdate=True)

Runs a command synchronously.

async kas.libkas.run_cmd_async(cmd, cwd, env=None, fail=True,
liveupdate=True)

Run a command asynchronously.

kas.libkas.ssh_add_key(env, key)

Adds an ssh key to the ssh-agent

kas.libkas.ssh_add_key_file(env, key_path)

Adds an ssh key file to the ssh-agent

kas.libkas.ssh_cleanup_agent()

Removes the identities and stops the ssh-agent instance

kas.libkas.ssh_no_host_key_check()

Disables ssh host key check

kas.libkas.ssh_setup_agent(envkeys=None)

Starts the ssh-agent

kas.libcmds Module
This module contains common commands used by kas plugins.
class kas.libcmds.CleanupSSHAgent

Removes all the identities and stops the ssh-agent instance.
execute(ctx)

This method executes the command.

class kas.libcmds.Command

An abstract class that defines the interface of a command.
execute(ctx)

This method executes the command.

class kas.libcmds.FinishSetupRepos

Finalizes the repo setup loop
execute(ctx)

This method executes the command.

class kas.libcmds.InitSetupRepos

Prepares setting up repos including the include logic
execute(ctx)

This method executes the command.

class kas.libcmds.Loop(name)

A class that defines a set of commands as a loop.
add(command)

Appends a command to the loop.

execute(ctx)

Executes the loop.

class kas.libcmds.Macro(use_common_setup=True, use_common_cleanup=True)

Contains commands and provides method to run them.
add(command)

Appends commands to the command list.

run(ctx, skip=None)

Runs a command from the command list with respect to the configuration.

class kas.libcmds.ReposApplyPatches

Applies the patches defined in the configuration to the repositories.
execute(ctx)

This method executes the command.

class kas.libcmds.ReposCheckout

Ensures that the right revision of each repo is checked out.
execute(ctx)

This method executes the command.

class kas.libcmds.ReposFetch

Fetches repositories defined in the configuration
execute(ctx)

This method executes the command.

class kas.libcmds.SetupDir

Creates the build directory.
execute(ctx)

This method executes the command.

class kas.libcmds.SetupEnviron

Sets up the kas environment.
execute(ctx)

This method executes the command.

class kas.libcmds.SetupHome

Sets up the home directory of kas.
execute(ctx)

This method executes the command.

class kas.libcmds.SetupReposStep

Single step of the checkout repos loop
execute(ctx)

This method executes the command.

class kas.libcmds.SetupSSHAgent

Sets up the ssh agent configuration.
execute(ctx)

This method executes the command.

class kas.libcmds.WriteBBConfig

Writes bitbake configuration files into the build directory.
execute(ctx)

This method executes the command.

kas.config Module
This module contains the implementation of the kas configuration.
class kas.config.Config(ctx, filename, target=None, task=None)

Implements the kas configuration based on config files.
find_missing_repos(repo_paths={})

Returns repos that are in config but not on disk

get_bblayers_conf_header()

Returns the bblayers.conf header

get_bitbake_targets()

Returns a list of bitbake targets

get_bitbake_task()

Returns the bitbake task

get_build_system()

Returns the pre-selected build system

get_config()

Returns the config dict.

get_distro()

Returns the distro

get_environment()

Returns the configured environment variables from the configuration file with possible overwritten values from the environment.

get_local_conf_header()

Returns the local.conf header

get_machine()

Returns the machine

get_multiconfig()

Returns the multiconfig array as bitbake string

get_repo(name)

Returns a Repo instance for the configuration with the key name.

get_repos()

Returns the list of repos.

get_repos_config()

Returns the repository configuration

kas.repos Module
This module contains the Repo class.
class kas.repos.GitRepo(name, url, path, refspec, layers, patches,
disable_operations)

Provides the git functionality for a Repo.

class kas.repos.MercurialRepo(name, url, path, refspec, layers,
patches, disable_operations)

Provides the hg functionality for a Repo.

class kas.repos.Repo(name, url, path, refspec, layers, patches,
disable_operations)

Represents a repository in the kas configuration.
static factory(name, repo_config, repo_defaults,
repo_fallback_path)

Returns a Repo instance depending on params.

static get_root_path(path, fallback=True)

Checks if path is under version control and returns its root path.

class kas.repos.RepoImpl(name, url, path, refspec, layers, patches,
disable_operations)

Provides a generic implementation for a Repo.
async apply_patches_async()

Applies patches to a repository asynchronously.

checkout()

Checks out the correct revision of the repo.

async fetch_async()

Starts asynchronous repository fetch.

kas.includehandler Module
This module implements how includes of configuration files are handled in kas.
exception kas.includehandler.IncludeException

Class for exceptions that appear in the include mechanism.

class kas.includehandler.IncludeHandler(top_files, top_repo_path)

Implements a handler where every configuration file should contain a dictionary as the base type with and 'includes' key containing a list of includes.

The includes can be specified in two ways: as a string containing the path, relative to the repository root from the current file, or as a dictionary. The dictionary must have a 'file' key containing the path to the include file and a 'repo' key containing the key of the repository. The path is interpreted relative to the repository root path.

The includes are read and merged from the deepest level upwards.
get_config(repos=None)

Parameters:

repos -- A dictionary that maps repo names to directory paths

Returns:

(config, repos)

config -- A dictionary containing the configuration repos -- A list of missing repo names that are needed to create a complete configuration

exception kas.includehandler.LoadConfigException(message, filename)

Class for exceptions that appear while loading a configuration file.

kas.includehandler.load_config(filename)

Load the configuration file and test if version is supported.

kas.plugins Module
This module contains and manages kas plugins
kas.plugins.all()

Get a list of all loaded kas plugin classes

kas.plugins.get(name)

Lookup a kas plugin class by name

kas.plugins.load()

Import all kas plugins

kas.plugins.register_plugins(mod)

Register all kas plugins found in a module

CONFIGURATION FORMAT CHANGES

Version 1 (Alias '0.10')
Added

Include mechanism

Version check

Version 2
Changed

Configuration file versions are now integers

Fixed

Including files from repos that are not defined in the current file

Version 3
Added

Task key that allows to specify which task to run (bitbake -c)

Version 4
Added

Target key now allows to be a list of target names

Version 5
Changed behavior

Using multiconfig:* targets adds appropriate BBMULTICONFIG entries to the local.conf automatically.

Version 6
Added

env key now allows to pass custom environment variables to the bitbake build process.

Version 7
Added

type property to repos to be able to express which version control system to use.

Version 8
Added

patches property to repos to be able to apply additional patches to the repo.

Version 9
Added

defaults key can now be used to set a default value for the repository property refspec and the repository patch property repo. These default values will be used if the appropriate properties are not defined for a given repository or patch.

Version 10
Added

build_system property to pre-select OE or Isar.

Version 11
Changed behavior

String item includes are now using repo-relative paths. File-relative is still supported by issues a deprecation warning.

bblayers.conf is generated with BBPATH and BBFILES preset to common defaults. Those can still be overwritten via bblayers_conf_headers.

Added

menu_configuration key stores the selections done via kas menu in a configuration file. It is only evaluated by that plugin.

Version 12
Added

For repositories, url and path can now be overridden with a null-value to switch between version-controlled repositories and unversioned local folders.

Index

Module Index

Search Page

AUTHOR

Daniel Wagner, Jan Kiszka, Claudius Heine

COPYRIGHT

Siemens AG, 2017-2018

pdf