Read − Read Target Test Chart.
Read Target Test Chart
chartread [−options] outfile
−v |
Verbose mode |
−c listno
Set communication port from the following list (default 1)
** No ports found **
−t |
Use transmission measurement mode |
||
−d |
Use display measurement mode (white Y relative results) |
||
−e |
Emissive for transparency on a light box |
||
−p |
Measure patch by patch rather than strip |
−x [lx]
Take external values, either L*a*b* (−xl) or XYZ (−xx).
−n |
Don’t save spectral information (default saves spectral) |
||
−l |
Save CIE as D50 L*a*b* rather than XYZ |
||
−L |
Save CIE as D50 L*a*b* as well as XYZ |
||
−r |
Resume reading partly read chart |
−I file.cal
Override calibration info from .ti2 in resulting .ti3
−F filter
Set filter configuration (if aplicable):
n |
None |
||
p |
Polarising filter |
||
6 |
D65 |
||
u |
U.V. Cut |
||
−N |
Disable initial calibration of instrument if possible |
||
−B |
Disable auto bi−directional strip recognition |
||
−H |
Use high resolution spectrum mode (if available) |
−X file.ccmx
Apply Colorimeter Correction Matrix
−X file.ccss
Use Colorimeter Calibration Spectral Samples for calibration
−Q observ
Choose CIE Observer for CCSS instrument: 1931_2 (def), 1964_10, S&B 1955_2, shaw, J&V 1978_2
−T ratio
Modify strip patch consistency tolerance by ratio
−S |
Suppress wrong strip & unexpected value warnings |
−W n|h|x
Override serial port flow control: n = none, h = HW, x = Xon/Xoff
−D [level]
Print debug diagnostics to stderr
outfile
Base name for input[ti2]/output[ti3] file