Last Change: 2018-09-07, 16:50
powered by manpag.es
gpx − G−code to X3G converter
gpx [−CFdgilpqrstvw] [−b BAUDRATE ] [−c CONFIG ] [−e EEPROM ] [−f
DIAMETER ] [−m MACHINE ] [−N h|t|ht] [−n SCALE ] [−x X] [−y Y] [−z Z] IN
[ OUT ]
|
−C |
Create temporary file with a copy of the machine configuration |
||
|
−C |
Create temporary file with a copy of the machine configuration |
||
|
−F |
write X3G on-wire framing data to output file |
−N h|t|ht
Disable writing of the X3G header (start build notice), tail (end build notice), or both
|
−d |
simulated ditto printing |
||
|
−g |
Makerbot/ReplicatorG GCODE flavor |
||
|
−i |
enable stdin and stdout support for command line pipes |
||
|
−l |
log to file |
||
|
−p |
override build percentage |
||
|
−q |
quiet mode |
||
|
−r |
Reprap GCODE flavor |
||
|
−s |
enable USB serial I/O and send x3G output to 3D printer |
||
|
−t |
truncate filename ( DOS 8.3 format) |
||
|
−v |
verose mode |
||
|
−w |
rewrite 5d extrusion values |
−b BAUDRATE
Set BAUDRATE for serial I/O. Default is 115200.
−c CONFIG
CONFIG is the filename of a custom machine definition (ini file).
−e EEPROM
EEPROM is the filename of an eeprom settings definition (ini file).
−f DIAMETER
DIAMETER is the actual filament diameter in the printer.
−m MACHINE
MACHINE is the predefined machine type. Available configurations are:
|
c3 |
= Cupcake Gen3 XYZ, Mk5/6 + Gen4 Extruder |
|||
|
c4 |
= Cupcake Gen4 XYZ, Mk5/6 + Gen4 Extruder |
|||
|
cp4 |
= Cupcake Pololu XYZ, Mk5/6 + Gen4 Extruder |
|||
|
cpp |
= Cupcake Pololu XYZ, Mk5/6 + Pololu Extruder |
|||
|
cxy |
= Core-XY with HBP − single extruder |
cxysz
= Core-XY with HBP − single extruder, slow Z
|
cr1 |
= Clone R1 Single with HBP |
cr1d
= Clone R1 Dual with HBP
|
r1 |
= Replicator 1 − single extruder |
|||
|
r1d |
= Replicator 1 − dual extruder |
|||
|
r2 |
= Replicator 2 (default) |
|||
|
r2h |
= Replicator 2 with HBP |
|||
|
r2x |
= Replicator 2X |
|||
|
t6 |
= TOM Mk6 − single extruder |
|||
|
t7 |
= TOM Mk7 − single extruder |
|||
|
t7d |
= TOM Mk7 − dual extruder |
|||
|
z |
= ZYYX − single extruder |
|||
|
zd |
= ZYYX − dual extruder |
−n SCALE
SCALE is the coordinate system scale for the conversion ( ABS = 1.0035)
−x X, −y Y, −z Y
X = the x axis offset
Y = the y axis offset
Z = the z axis offset
gpx −p −m r2 my−sliced−model.gcode
gpx −c custom−tom.ini example.gcode /volumes/things/example.x3g
gpx −x 3 −y −3 offset−model.gcode
gpx −m c4 −s sio−example.gcode /dev/tty.usbmodem