sourCEntral - mobile manpages

pdf

PERF−DIFF

NAME

perf-diff − Read perf.data files and display the differential profile

SYNOPSIS

perf diff [baseline file] [data file1] [[data file2] ... ]

DESCRIPTION

This command displays the performance difference amongst two or more perf.data files captured via perf record.

If no parameters are passed it will assume perf.data.old and perf.data.

The differential profile is displayed only for events matching both specified perf.data files.

If no parameters are passed the samples will be sorted by dso and symbol. As the perf.data files could come from different binaries, the symbols addresses could vary. So perf diff is based on the comparison of the files and symbols name.

OPTIONS

−D, −−dump−raw−trace

Dump raw trace in ASCII.

−−kallsyms=<file>

kallsyms pathname

−m, −−modules

Load module symbols. WARNING: use only with −k and LIVE kernel

−d, −−dsos=

Only consider symbols in these dsos. CSV that understands file://filename entries. This option will affect the percentage of the Baseline/Delta column. See −−percentage for more info.

−C, −−comms=

Only consider symbols in these comms. CSV that understands file://filename entries. This option will affect the percentage of the Baseline/Delta column. See −−percentage for more info.

−S, −−symbols=

Only consider these symbols. CSV that understands file://filename entries. This option will affect the percentage of the Baseline/Delta column. See −−percentage for more info.

−s, −−sort=

Sort by key(s): pid, comm, dso, symbol, cpu, parent, srcline. Please see description of −−sort in the perf−report man page.

−t, −−field−separator=

Use a special separator character and don’t pad with spaces, replacing all occurrences of this separator in symbol names (and other output) with a . character, that thus it’s the only non valid separator.

−v, −−verbose

Be verbose, for instance, show the raw counts in addition to the diff.

−q, −−quiet

Do not show any message. (Suppress −v)

−f, −−force

Don’t do ownership validation.

−−symfs=<directory>

Look for files with symbols relative to this directory.

−b, −−baseline−only

Show only items with match in baseline.

−c, −−compute

Differential computation selection − delta, ratio, wdiff, delta−abs (default is delta−abs). Default can be changed using diff.compute config option. See COMPARISON METHODS section for more info.

−p, −−period

Show period values for both compared hist entries.

−F, −−formula

Show formula for given computation.

−o, −−order

Specify compute sorting column number. 0 means sorting by baseline overhead and 1 (default) means sorting by computed value of column 1 (data from the first file other base baseline). Values more than 1 can be used only if enough data files are provided. The default value can be set using the diff.order config option.

−−percentage

Determine how to display the overhead percentage of filtered entries. Filters can be applied by −−comms, −−dsos and/or −−symbols options.

"relative" means it's relative to filtered entries only so that the
sum of shown entries will be always 100%. "absolute" means it retains
the original value before and after the filter is applied.

COMPARISON

The comparison is governed by the baseline file. The baseline perf.data file is iterated for samples. All other perf.data files specified on the command line are searched for the baseline sample pair. If the pair is found, specified computation is made and result is displayed.

All samples from non−baseline perf.data files, that do not match any baseline entry, are displayed with empty space within baseline column and possible computation results (delta) in their related column.

Example files samples: − file A with samples f1, f2, f3, f4, f6 − file B with samples f2, f4, f5 − file C with samples f1, f2, f5

Example output: x − computation takes place for pair b − baseline sample percentage

• perf diff A B C

baseline/A compute/B compute/C samples
−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−
b x f1
b x x f2
b f3
b x f4
b f6
x x f5

• perf diff B A C

baseline/B compute/A compute/C samples
−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−
b x x f2
b x f4
b x f5
x x f1
x f3
x f6

• perf diff C B A

baseline/C compute/B compute/A samples
−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−
b x f1
b x x f2
b x f5
x f3
x x f4
x f6

COMPARISON METHODS

delta
If specified the Delta column is displayed with value d computed as:

d = A−>period_percent − B−>period_percent

with: − A/B being matching hist entry from data/baseline file specified (or perf.data/perf.data.old) respectively.

• period_percent being the % of the hist entry period value within single data file

• with filtering by −C, −d and/or −S, period_percent might be changed relative to how entries are filtered. Use −−percentage=absolute to prevent such fluctuation.

delta−abs
Same as 'delta‘ method, but sort the result with the absolute values.

ratio
If specified the Ratio column is displayed with value r computed as:

r = A−>period / B−>period

with: − A/B being matching hist entry from data/baseline file specified (or perf.data/perf.data.old) respectively.

• period being the hist entry period value

wdiff:WEIGHT−B,WEIGHT−A
If specified the Weighted diff column is displayed with value d computed as:

d = B−>period * WEIGHT−A − A−>period * WEIGHT−B

• A/B being matching hist entry from data/baseline file specified (or perf.data/perf.data.old) respectively.

• period being the hist entry period value

• WEIGHT−A/WEIGHT−B being user supplied weights in the the −c option behind : separator like −c wdiff:1,2.

• WEIGHT−A being the weight of the data file

• WEIGHT−B being the weight of the baseline data file

SEE ALSO

perf-record(1), perf-report(1)

pdf