sourCEntral - mobile manpages

pdf

RspRegistrar(1) BSD General Commands Manual RspRegistrar(1)

NAME

rspregistrar — RSerPool Pool Registrar (PR) Service

SYNOPSIS

rspregistrar [−announcettl=TTL] [−asap=auto|address:port,address,...] [−asapannounce=auto|address:port] [−autoclosetimeout=seconds] [−endpointkeepalivetransmissioninterval=milliseconds] [−endpointkeepalivetimeoutinterval=milliseconds] [−maxbadpereports=reports] [−maxhresitems=items] [−maxincrement=increment] [−minaddressscope=loopback|sitelocal|global] [−serverannouncecycle=milliseconds] [−enrp=auto|address:port,address,...] [−enrpannounce=auto|address:port] [−maxelementsperhtrequest=items] [−mentordiscoverytimeout=milliseconds] [−peer=address:port] [−peerheartbeatcycle=milliseconds] [−peermaxtimelastheard=millisecond] [−peermaxtimenoresponse=milliseconds] [−takeoverexpiryinterval=milliseconds] [−cspinterval=milliseconds] [−cspserver=address:port] [−logcolor=on|off] [−logappend=filename] [−logfile=filename] [−loglevel=0-9]

DESCRIPTION

rspregistrar provides a registrar service for Reliable Server Pooling (RSerPool) pool elements (PEs) and pool users (PUs). PRs of an operation scope synchronize their view of the handlespace using the Endpoint haNdlespace Redundancy Protocol (ENRP), transported via SCTP. An operation scope has a limited range, e.g. an organization or only a building. In particular, it is restricted to a single administrative domain − in contrast to GRID computing − in order to keep the management complexity at a minimum. Nevertheless, PEs may be distributed globally for their service to survive localized disasters.

PEs choose an arbitrary PR of the operation scope to register into a pool by using the Aggregate Server Access Protocol (ASAP), again transported via SCTP. Upon registration at a PR, the chosen PR becomes the Home-PR (PR-H) of the newly registered PE. A PR-H is responsible for monitoring its PEs’ availability by keep-alive messages (to be acknowledged by the PE within a given timeout) and propagates the information about its PEs to the other PRs of the operation scope via ENRP updates.

In order to access the service of a pool given by its PH, a PU requests a PE selection from an arbitrary PR of the operation scope, using the Aggregate Server Access Protocol (ASAP), transported via SCTP. The PR selects the requested list of PE identities by applying a pool-specific selection rule, called pool policy.

In order to allow for automatic configuration, a PR can send out regular announces via an ASAP and ENRP multicast address. PEs and PUs can listen to this address to learn the list of currently available PRs.

ARGUMENTS

The following options are available:

−quiet

Do not print startup and shutdown messages.

−announcettl=TTL

Sets the TTL for outgoing ASAP Announce/ENRP Presence messages via multicast.

Logging Parameters:

It is recommended to use at least a value of 2 to see possibly important error messages and warnings.

−logcolor=on|off

Turns ANSI colorization of the logging output on or off.

−logappend=filename

Write logging output to a file (default is stdout); output will be appended to given file.

−logfile=filename

Write logging output to a file (default is stdout); given file will be overwritten.

−loglevel=0-9

Sets the logging verbosity from 0 (none) to 9 (very verbose).

Component Status Protocol (CSP) Parameters:

−cspinterval=milliseconds

Sets the interval for the CSP status updates in milliseconds.

−cspserver=address:port

Sets the CSP monitor server’s address and port.

Aggregate Server Access Protocol (ASAP) Parameters:

−autoclosetimeout=seconds

Sets the SCTP autoclose timeout for idle ASAP associations.

−asap=auto|address:port,address,...

Sets the ASAP endpoint address(es). Use "auto" to automatically set it (default).

−asapannounce=auto|address:port

Sets the multicast address and UDP port to send the ASAP Announces to. Use "auto" to automatically set it (default). Examples:
−asapannounce=auto
−asapannounce=239.0.0.1:3863

−endpointkeepalivetransmissioninterval=milliseconds

Sets the ASAP Endpoint Keep Alive interval.

−endpointkeepalivetimeoutinterval=milliseconds

Sets the ASAP Endpoint Keep Alive timeout.

−maxbadpereports=reports

Sets the maximum number of ASAP Endpoint Unreachable reports before removing a PE.

−maxincrement=increment

Sets the MaxIncrement constant. Handle with care!

−maxhresitems=items

Sets the MaxHResItems constant.

−minaddressscope=loopback|sitelocal|global

Sets the minimum address scope acceptable for registered PEs:
loopback: Loopback address (only valid on the same node!)
site-local: Site-local addresses (e.g. 192.168.1.1, etc.)
global: Global addresses

−serverannouncecycle=milliseconds

Sets the ASAP Announce interval.

Endpoint Handlespace Redundancy Protocol (ENRP) Parameters:

−enrp=auto|address:port,address,...

Sets the ENRP endpoint address(es). Use "auto" to automatically set it (default). Examples:
−enrp=auto
−enrp=1.2.3.4:9901
−enrp=1.2.3.4:9901,[2000::1:2:3],9.8.7.6

−enrpannounce=auto|address:port

Sets the multicast address and UDP port to send the ENRP Announces to. Use "auto" to automatically set it (default). Examples:
−enrpannounce=auto
−enrpannounce=239.0.0.1:9901

−maxelementsperhtrequest=items

Sets the maximum number of items per ENRP Handle Table Response.

−mentordiscoverytimeout=milliseconds

Sets the mentor PR discovery timeout in milliseconds.

−peer=address:port

Adds a static PR entry into the Peer List. It is possible to add multiple entries.

−peerheartbeatcycle=milliseconds

Sets the ENRP peer heartbeat interval.

−peermaxtimelastheard=milliseconds

Sets the ENRP peer max time last heard.

−peermaxtimenoresponse=milliseconds

Sets the ENRP maximum time without response.

−takeoverexpiryinterval=milliseconds

Sets the ENRP takeover timeout.

ENVIRONMENT

rspregistrar uses the environment variables CSP_SERVER and CSP_INTERVAL to define a CSP server to send reports to in the specified interval.

DIAGNOSTICS

If loglevel>0, log messages will be printed to stdout or into a specified log file.

SEE ALSO

For a detailed introduction to RSerPool, see:
http://duepublico.uni-duisburg-essen.de/servlets/DerivateServlet/Derivate-16326/Dre2006-final.pdf

Thomas Dreibholz’s RSerPool Page:
http://tdrwww.iem.uni-due.de/dreibholz/rserpool/

RSerPool Registrar June 06, 2012 RSerPool Registrar

pdf