sourCEntral - mobile manpages

pdf

firehol−connmark

NAME

firehol−connmark − set a stateful mark on a connection

SYNOPSIS

Warning − this manual page is out of date for nightly build/v3 behaviour

{ connmark | connmark46 } { value | save | restore } chain rule−params

connmark4 { value | save | restore } chain rule−params

connmark6 { value | save | restore } chain rule−params

DESCRIPTION

The connmark helper command sets a mark on a whole connection. It applies to both directions.

Note

To set a mark on packets matching particular rules, regardless of any connection, see firehol−mark(5).

The value is the mark value to set (a 32 bit integer). If you specify save then the mark on the matched packet will be turned into a connmark. If you specify restore then the matched packet will have its mark set to the current connmark.

The chain will be used to find traffic to mark. It can be any of the iptables(8) built in chains belonging to the mangle table. The chain names are: INPUT, FORWARD, OUTPUT, PREROUTING and POSTROUTING. The names are case−sensitive.

The rule−params define a set of rule parameters to match the traffic that is to be marked within the chosen chain. See firehol−params(5) for more details.

Any connmark commands will affect all traffic matched. They must be declared before the first router or interface.

EXAMPLES

Consider a scenario with 3 ethernet ports, where eth0 is on the local LAN, eth1 connects to ISP 'A' and eth2 to ISP 'B'. To ensure traffic leaves via the same ISP as it arrives from you can mark the traffic.  

 # mark connections when they arrive from the ISPs 
 connmark 1 PREROUTING inface eth1 
 connmark 2 PREROUTING inface eth2 


 # restore the mark (from the connmark) when packets arrive from the LAN 
 connmark restore OUTPUT 
 connmark restore PREROUTING inface eth0

It is then possible to use the commands from iproute2 such as ip(8), to pick the correct routing table based on the mark on the packets.

SEE ALSO

firehol(1) − FireHOL program

firehol.conf(5) − FireHOL configuration

firehol−params(5) − optional rule parameters

firehol−mark(5) − mark traffic for traffic shaping tools

iptables(8) (http://ipset.netfilter.org/iptables.man.html) − administration tool for IPv4 firewalls

ip6tables(8) (http://ipset.netfilter.org/ip6tables.man.html) − administration tool for IPv6 firewalls

ip(8) − show / manipulate routing, devices, policy routing and tunnels

FireHOL Website (http://firehol.org/)

FireHOL Online PDF Manual (http://firehol.org/firehol-manual.pdf)

FireHOL Online Documentation (http://firehol.org/documentation/)

Linux Advanced Routing & Traffic Control HOWTO (http://lartc.org/howto/)

AUTHORS

FireHOL Team.

pdf