FENCE_AGENT
NAME
fence_hpblade - Fence agent for HP BladeSystem
DESCRIPTION
fence_hpblade is an I/O Fencing agent which can be used with HP BladeSystem and HP Integrity Superdome X. It logs into the onboard administrator of an enclosure via telnet or ssh and uses the command line interface to power blades or partitions on or off.
fence_hpblade accepts options on the command line as well as from stdin. Fenced sends parameters through stdin when it execs the agent. fence_hpblade can be run by itself with command line options. This is useful for testing and for turning outlets on or off from scripts.
Vendor URL: http://www.hp.com
PARAMETERS
|
|
-o, --action=[action]
|
|
|
Fencing action (Default Value: reboot)
|
-c, --command-prompt=[prompt]
|
|
|
Force Python regex for command prompt (Default Value: [’c7000oa>’])
|
-k, --identity-file=[filename]
|
|
|
Identity file (private key) for SSH
|
-4, --inet4-only
|
|
|
Forces agent to use IPv4 addresses only
|
-6, --inet6-only
|
|
|
Forces agent to use IPv6 addresses only
|
-a, --ip=[ip]
|
|
|
IP address or hostname of fencing device This parameter is always required.
|
-u, --ipport=[port]
|
|
|
TCP/UDP port to use for connection with device (Default Value: 23)
|
-l, --username=[name]
|
|
|
Login name This parameter is always required.
|
-p, --password=[password]
|
|
|
Login password or passphrase
|
-S, --password-script=[script]
|
|
|
Script to run to retrieve password
|
-n, --plug=[id]
|
|
|
Physical plug number on device, UUID or identification of machine This parameter is always required.
|
-x, --ssh
--ssh-options=[options]
-q, --quiet
|
|
|
Disable logging to stderr. Does not affect --verbose or --debug logging to syslog.
|
-v, --verbose
-D, --debug-file=[debugfile]
|
|
|
Write debug information to given file
|
-V, --version
|
|
|
Display version information and exit
|
-h, --help
-C, --separator=[char]
|
|
|
Separator for CSV created by ’list’ operation (Default Value: ,)
|
--delay=[seconds]
|
|
|
Wait X seconds before fencing is started (Default Value: 0)
|
--login-timeout=[seconds]
|
|
|
Wait X seconds for cmd prompt after login (Default Value: 10)
|
--missing-as-off
|
|
|
Missing port returns OFF instead of failure
|
--power-timeout=[seconds]
|
|
|
Test X seconds for status change after ON/OFF (Default Value: 20)
|
--power-wait=[seconds]
|
|
|
Wait X seconds after issuing ON/OFF (Default Value: 0)
|
--shell-timeout=[seconds]
|
|
|
Wait X seconds for cmd prompt after issuing command (Default Value: 3)
|
--retry-on=[attempts]
|
|
|
Count of attempts to retry power on (Default Value: 1)
|
--ssh-path=[path]
|
|
|
Path to ssh binary (Default Value: /usr/bin/ssh)
|
--telnet-path=[path]
Path to telnet binary (Default Value: /usr/bin/telnet)
ACTIONS
|
|
|
on
|
|
Power on machine.
|
|
off
|
|
Power off machine.
|
|
reboot
|
|
Reboot machine.
|
|
status
|
|
This returns the status of the plug/virtual machine.
|
|
list
|
|
List available plugs with aliases/virtual machines if there is support for more then one device. Returns N/A otherwise.
|
list-status
List available plugs with aliases/virtual machines and their power state if it can be obtained without additional commands.
monitor
Check the health of fence device
metadata
Display the XML metadata describing this resource.
validate-all
Validate if all required parameters are entered.
STDIN PARAMETERS
|
action
|
|
Fencing action (Default Value: reboot)
|
|
cmd_prompt
Force Python regex for command prompt (Default Value: [’c7000oa>’])
identity_file
Identity file (private key) for SSH
inet4_only
Forces agent to use IPv4 addresses only
inet6_only
Forces agent to use IPv6 addresses only
|
ipaddr
|
|
IP address or hostname of fencing device This parameter is always required.
|
|
ipport
|
|
TCP/UDP port to use for connection with device (Default Value: 23)
|
|
login
|
|
Login name This parameter is always required.
|
|
passwd
|
|
Login password or passphrase
|
passwd_script
Script to run to retrieve password
|
port
|
|
Physical plug number on device, UUID or identification of machine This parameter is always required.
|
|
secure
|
|
Use SSH connection
|
ssh_options
SSH options to use
|
quiet
|
|
Disable logging to stderr. Does not affect --verbose or --debug logging to syslog.
|
verbose
Verbose mode
|
debug
|
|
Write debug information to given file
|
|
version
Display version information and exit
|
help
|
|
Display help and exit
|
|
separator
Separator for CSV created by ’list’ operation (Default Value: ,)
|
delay
|
|
Wait X seconds before fencing is started (Default Value: 0)
|
login_timeout
Wait X seconds for cmd prompt after login (Default Value: 10)
missing_as_off
Missing port returns OFF instead of failure
power_timeout
Test X seconds for status change after ON/OFF (Default Value: 20)
power_wait
Wait X seconds after issuing ON/OFF (Default Value: 0)
shell_timeout
Wait X seconds for cmd prompt after issuing command (Default Value: 3)
retry_on
Count of attempts to retry power on (Default Value: 1)
ssh_path
Path to ssh binary (Default Value: /usr/bin/ssh)
telnet_path
Path to telnet binary (Default Value: /usr/bin/telnet)
|
|