sourCEntral - mobile manpages

pdf

FENCE_AGENT

NAME

fence_ilo - Fence agent for HP iLO

fence_ilo2 - Fence agent for HP iLO2 (symlink)

DESCRIPTION

fence_ilo is an I/O Fencing agent used for HP servers with the Integrated Light Out (iLO) PCI card.The agent opens an SSL connection to the iLO card. Once the SSL connection is established, the agent is able to communicate with the iLO card through an XML stream.

fence_ilo accepts options on the command line as well as from stdin. Fenced sends parameters through stdin when it execs the agent. fence_ilo can be run by itself with command line options. This is useful for testing and for turning outlets on or off from scripts.

Vendor URL: http://www.hp.com

PARAMETERS

-o, --action=[action]

Fencing action (Default Value: reboot)

-4, --inet4-only

Forces agent to use IPv4 addresses only

-6, --inet6-only

Forces agent to use IPv6 addresses only

-a, --ip=[ip]

IP address or hostname of fencing device

-u, --ipport=[port]

TCP/UDP port to use for connection with device (Default Value: 443)

-l, --username=[name]

Login name This parameter is always required.

-t, --notls

Disable TLS negotiation and force SSL3.0. This should only be used for devices that do not support TLS1.0 and up.

-p, --password=[password]

Login password or passphrase

-S, --password-script=[script]

Script to run to retrieve password

-n, --plug=[ip]

IP address or hostname of fencing device (together with --port-as-ip)

-r, --ribcl-version=[version]

Force ribcl version to use

-z, --ssl

Use SSL connection with verifying certificate (Default Value: 1)

--ssl-insecure

Use SSL connection without verifying certificate

--ssl-secure

Use SSL connection with verifying certificate

--tls1.0

Disable TLS negotiation and force TLS1.0. This should only be used for devices that do not support TLS1.1 and up.

-q, --quiet

Disable logging to stderr. Does not affect --verbose or --debug logging to syslog.

-v, --verbose

Verbose mode

-D, --debug-file=[debugfile]

Write debug information to given file

-V, --version

Display version information and exit

-h, --help

Display help and exit

--delay=[seconds]

Wait X seconds before fencing is started (Default Value: 0)

--login-timeout=[seconds]

Wait X seconds for cmd prompt after login (Default Value: 10)

--port-as-ip

Make "port/plug" to be an alias to IP address

--power-timeout=[seconds]

Test X seconds for status change after ON/OFF (Default Value: 20)

--power-wait=[seconds]

Wait X seconds after issuing ON/OFF (Default Value: 0)

--shell-timeout=[seconds]

Wait X seconds for cmd prompt after issuing command (Default Value: 3)

--retry-on=[attempts]

Count of attempts to retry power on (Default Value: 3)

--gnutlscli-path=[path]

Path to gnutls-cli binary (Default Value: /usr/bin/gnutls-cli)

ACTIONS

on

Power on machine.

off

Power off machine.

reboot

Reboot machine.

status

This returns the status of the plug/virtual machine.

monitor

Check the health of fence device

metadata

Display the XML metadata describing this resource.

validate-all

Validate if all required parameters are entered.

STDIN PARAMETERS

action

Fencing action (Default Value: reboot)

inet4_only

Forces agent to use IPv4 addresses only

inet6_only

Forces agent to use IPv6 addresses only

ipaddr

IP address or hostname of fencing device

ipport

TCP/UDP port to use for connection with device (Default Value: 443)

login

Login name This parameter is always required.

notls

Disable TLS negotiation and force SSL3.0. This should only be used for devices that do not support TLS1.0 and up.

passwd

Login password or passphrase

passwd_script

Script to run to retrieve password

port

IP address or hostname of fencing device (together with --port-as-ip)

ribcl

Force ribcl version to use

ssl

Use SSL connection with verifying certificate (Default Value: 1)

ssl_insecure

Use SSL connection without verifying certificate

ssl_secure

Use SSL connection with verifying certificate

tls1.0

Disable TLS negotiation and force TLS1.0. This should only be used for devices that do not support TLS1.1 and up.

quiet

Disable logging to stderr. Does not affect --verbose or --debug logging to syslog.

verbose

Verbose mode

debug

Write debug information to given file

version

Display version information and exit

help

Display help and exit

delay

Wait X seconds before fencing is started (Default Value: 0)

login_timeout

Wait X seconds for cmd prompt after login (Default Value: 10)

port_as_ip

Make "port/plug" to be an alias to IP address

power_timeout

Test X seconds for status change after ON/OFF (Default Value: 20)

power_wait

Wait X seconds after issuing ON/OFF (Default Value: 0)

shell_timeout

Wait X seconds for cmd prompt after issuing command (Default Value: 3)

retry_on

Count of attempts to retry power on (Default Value: 3)

gnutlscli_path

Path to gnutls-cli binary (Default Value: /usr/bin/gnutls-cli)

pdf