sourCEntral - mobile manpages

pdf

FENCE_AGENT

NAME

fence_ilo4 - Fence agent for IPMI

fence_ilo3 - Fence agent for HP iLO3 (symlink)

fence_ilo4 - Fence agent for HP iLO4 (symlink)

fence_imm - Fence agent for IBM Integrated Management Module (symlink)

fence_idrac - Fence agent for Dell iDRAC (symlink)

DESCRIPTION

fence_ipmilan is an I/O Fencing agentwhich can be used with machines controlled by IPMI.This agent calls support software ipmitool (http://ipmitool.sf.net/). WARNING! This fence agent might report success before the node is powered off. You should use -m/method onoff if your fence device works correctly with that option.

fence_ilo4 accepts options on the command line as well as from stdin. Fenced sends parameters through stdin when it execs the agent. fence_ilo4 can be run by itself with command line options. This is useful for testing and for turning outlets on or off from scripts.

Vendor URL:

PARAMETERS

-o, --action=[action]

Fencing action (Default Value: reboot)

-A, --auth=[auth]

IPMI Lan Auth type. (md5|password|none)

-C, --cipher=[cipher]

Ciphersuite to use (same as ipmitool -C parameter)

-4, --inet4-only

Forces agent to use IPv4 addresses only

-6, --inet6-only

Forces agent to use IPv6 addresses only

-a, --ip=[ip]

IP address or hostname of fencing device

-u, --ipport=[port]

TCP/UDP port to use for connection with device (Default Value: 623)

-P, --lanplus

Use Lanplus to improve security of connection (Default Value: 1)

-l, --username=[name]

Login name

-m, --method=[method]

Method to fence (onoff|cycle) (Default Value: onoff)

-p, --password=[password]

Login password or passphrase

-S, --password-script=[script]

Script to run to retrieve password

-n, --plug=[ip]

IP address or hostname of fencing device (together with --port-as-ip)

-L, --privlvl=[level]

Privilege level on IPMI device (callback|user|operator|administrator) (Default Value: administrator)

-q, --quiet

Disable logging to stderr. Does not affect --verbose or --debug logging to syslog.

-v, --verbose

Verbose mode

-D, --debug-file=[debugfile]

Write debug information to given file

-V, --version

Display version information and exit

-h, --help

Display help and exit

--delay=[seconds]

Wait X seconds before fencing is started (Default Value: 0)

--ipmitool-path=[path]

Path to ipmitool binary (Default Value: /usr/bin/ipmitool)

--login-timeout=[seconds]

Wait X seconds for cmd prompt after login (Default Value: 5)

--port-as-ip

Make "port/plug" to be an alias to IP address

--power-timeout=[seconds]

Test X seconds for status change after ON/OFF (Default Value: 20)

--power-wait=[seconds]

Wait X seconds after issuing ON/OFF (Default Value: 2)

--shell-timeout=[seconds]

Wait X seconds for cmd prompt after issuing command (Default Value: 3)

--retry-on=[attempts]

Count of attempts to retry power on (Default Value: 1)

--use-sudo

Use sudo (without password) when calling 3rd party software

--sudo-path=[path]

Path to sudo binary (Default Value: /usr/bin/sudo)

ACTIONS

on

Power on machine.

off

Power off machine.

reboot

Reboot machine.

status

This returns the status of the plug/virtual machine.

monitor

Check the health of fence device

metadata

Display the XML metadata describing this resource.

validate-all

Validate if all required parameters are entered.

diag

Pulse a diagnostic interrupt to the processor(s).

STDIN PARAMETERS

action

Fencing action (Default Value: reboot)

auth

IPMI Lan Auth type. (md5|password|none)

cipher

Ciphersuite to use (same as ipmitool -C parameter)

inet4_only

Forces agent to use IPv4 addresses only

inet6_only

Forces agent to use IPv6 addresses only

ipaddr

IP address or hostname of fencing device

ipport

TCP/UDP port to use for connection with device (Default Value: 623)

lanplus

Use Lanplus to improve security of connection (Default Value: 1)

login

Login name

method

Method to fence (onoff|cycle) (Default Value: onoff)

passwd

Login password or passphrase

passwd_script

Script to run to retrieve password

port

IP address or hostname of fencing device (together with --port-as-ip)

privlvl

Privilege level on IPMI device (callback|user|operator|administrator) (Default Value: administrator)

quiet

Disable logging to stderr. Does not affect --verbose or --debug logging to syslog.

verbose

Verbose mode

debug

Write debug information to given file

version

Display version information and exit

help

Display help and exit

delay

Wait X seconds before fencing is started (Default Value: 0)

ipmitool_path

Path to ipmitool binary (Default Value: /usr/bin/ipmitool)

login_timeout

Wait X seconds for cmd prompt after login (Default Value: 5)

port_as_ip

Make "port/plug" to be an alias to IP address

power_timeout

Test X seconds for status change after ON/OFF (Default Value: 20)

power_wait

Wait X seconds after issuing ON/OFF (Default Value: 2)

shell_timeout

Wait X seconds for cmd prompt after issuing command (Default Value: 3)

retry_on

Count of attempts to retry power on (Default Value: 1)

sudo

Use sudo (without password) when calling 3rd party software

sudo_path

Path to sudo binary (Default Value: /usr/bin/sudo)

pdf