sourCEntral - mobile manpages

pdf

slk

NAME

slk_init, slk_set, slk_wset, slk_refresh, slk_noutrefresh, slk_label, slk_clear, slk_restore, slk_touch, slk_attron, slk_attrset, slk_attroff, slk_attr_on, slk_attr_set, slk_attr_off, slk_attr, slk_color, extended_slk_colorcurses soft label routines

SYNOPSIS

#include <curses.h>

int slk_init(int fmt);

int slk_set(int labnum, const char *label, int fmt);
int slk_wset(int
labnum, const wchar_t *label, int fmt);

char *slk_label(int labnum);

int slk_refresh(void);
int slk_noutrefresh(void);
int slk_clear(void);
int slk_restore(void);
int slk_touch(void);

int slk_attron(const chtype attrs);
int slk_attroff(const chtype
attrs);
int slk_attrset(const chtype
attrs);
int slk_attr_on(attr_t
attrs, void* opts);
int slk_attr_off(const attr_t
attrs, void * opts);
int slk_attr_set(const attr_t
attrs, short pair, void* opts);

attr_t slk_attr(void);

int slk_color(short pair);
/* extension */
int extended_slk_color(int
pair);

DESCRIPTION

The slk* functions manipulate the set of soft function-key labels that exist on many terminals. For those terminals that do not have soft labels, curses takes over the bottom line of stdscr, reducing the size of stdscr and the variable LINES. curses standardizes on eight labels of up to eight characters each. In addition to this, the ncurses implementation supports a mode where it simulates 12 labels of up to five characters each. This is useful for PC-like enduser devices. ncurses simulates this mode by taking over up to two lines at the bottom of the screen; it does not try to use any hardware support for this mode.

Initialization
The slk_init routine must be called before initscr or newterm is called. If initscr eventually uses a line from stdscr to emulate the soft labels, then fmt determines how the labels are arranged on the screen:

0

indicates a 3−2−3 arrangement of the labels.

1

indicates a 4−4 arrangement

2

indicates the PC-like 4−4−4 mode.

3

is again the PC-like 4−4−4 mode, but in addition an index line is generated, helping the user to identify the key numbers easily.

Labels
The slk_set routine (and the slk_wset routine for the wide-character library) has three parameters:

labnum

is the label number, from 1 to 8 (12 for fmt in slk_init is 2 or 3);

label

is be the string to put on the label, up to eight (five for fmt in slk_init is 2 or 3) characters in length. A null string or a null pointer sets up a blank label.

fmt

is either 0, 1, or 2, indicating whether the label is to be left-justified, centered, or right-justified, respectively, within the label.

The slk_label routine returns the current label for label number labnum, with leading and trailing blanks stripped.

Screen updates
The slk_refresh and slk_noutrefresh routines correspond to the wrefresh and wnoutrefresh routines.

The slk_clear routine clears the soft labels from the screen.

The slk_restore routine restores the soft labels to the screen after a slk_clear has been performed.

The slk_touch routine forces all the soft labels to be output the next time a slk_noutrefresh is performed.

Video attributes
The slk_attron, slk_attrset, slk_attroff and slk_attr routines correspond to attron, attrset, attroff and attr_get, respectively. They have an effect only if soft labels are simulated on the bottom line of the screen. The default highlight for soft keys is A_STANDOUT (as in System V curses, which does not document this fact).

Colors
The slk_color routine corresponds to color_set. It has an effect only if soft labels are simulated on the bottom line of the screen.

Because slk_color accepts only short (signed 16-bit integer) values, this implementation provides extended_slk_color which accepts an integer value, e.g., 32-bits.

RETURN VALUE

These routines return ERR upon failure and OK (SVr4 specifies only "an integer value other than ERR") upon successful completion.

X/Open defines no error conditions. In this implementation

slk_attr

returns the attribute used for the soft keys.

slk_attroff, slk_attron, slk_clear, slk_noutrefresh, slk_refresh,
slk_touch

return an error if the terminal or the softkeys were not initialized.

slk_attrset

returns an error if the terminal or the softkeys were not initialized.

slk_attr_set

returns an error if the terminal or the softkeys were not initialized, or the color pair is outside the range 0..COLOR_PAIRS−1.

slk_color

returns an error if the terminal or the softkeys were not initialized, or the color pair is outside the range 0..COLOR_PAIRS−1.

slk_init

returns an error if the format parameter is outside the range 0..3.

slk_label

returns NULL on error.

slk_set

returns an error if the terminal or the softkeys were not initialized, or the labnum parameter is outside the range of label counts, or if the format parameter is outside the range 0..2, or if memory for the labels cannot be allocated.

HISTORY

SVr3 introduced these functions:
slk_clear
slk_init
slk_label
slk_noutrefresh
slk_refresh
slk_restore
slk_set
slk_touch

SVr4 added these functions:
slk_attroff
slk_attron
slk_attrset
slk_start

X/Open Curses added these:
slk_attr_off
slk_attr_on
slk_attr_set
slk_color
slk_wset

EXTENSIONS

X/Open Curses documents the opts argument as reserved for future use, saying that it must be null. This implementation uses that parameter in ABI 6 for the functions which have a color-pair parameter to support extended color pairs.

For functions which modify the color, e.g., slk_attr_set, if opts is set it is treated as a pointer to int, and used to set the color pair instead of the short pair parameter.

NOTES

Most applications would use slk_noutrefresh because a wrefresh is likely to follow soon.

PORTABILITY

The XSI Curses standard, Issue 4, described the soft-key functions, with some differences from SVr4 curses:

It added functions like the SVr4 attribute-manipulation functions slk_attron, slk_attroff, slk_attrset, but which use attr_t parameters (rather than chtype), along with a reserved opts parameter.

Two of these new functions (unlike the SVr4 functions) have no provision for color: slk_attr_on and slk_attr_off.

The third function (slk_attr_set) has a color-pair parameter.

It added const qualifiers to parameters (unnecessarily), and

It added slk_color.

The format codes 2 and 3 for slk_init and the function slk_attr are specific to ncurses.

X/Open Curses does not specify a limit for the number of colors and color pairs which a terminal can support. However, in its use of short for the parameters, it carries over SVr4’s implementation detail for the compiled terminfo database, which uses signed 16-bit numbers. This implementation provides extended versions of those functions which use short parameters, allowing applications to use larger color- and pair-numbers.

SEE ALSO

ncurses(3NCURSES), attr(3NCURSES), initscr(3NCURSES), refresh(3NCURSES), curses_variables(3NCURSES).

pdf